Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Postby Tug 747 on Sun 18 May 2014, 11:32 am

Well this is my entry for this group build. On inspection it doesn't appear to be that bad a kit it does have some raised panel lines but as there are not to many pieces so I don't think it will take me long to knock together. It will be finished in Desert pink and represent one of the Jaguar force in operation Granby in 1990 - 91.

So on with the box art and a shot of the sprue.

Image
IMG_0021 by Newdawn images, on Flickr

Image
IMG_0024 by Newdawn images, on Flickr

Well the fuselage halves interior have been sprayed and joined together and the wings have also been glued.

Image
IMG_0215 by Newdawn images, on Flickr

Image
IMG_0217 by Newdawn images, on Flickr

I then offered the wings to the fuselage for a dry fit and they don't seem to bad but it will need a small amount of work to rectify the gaps

Image
IMG_0219 by Newdawn images, on Flickr

Until the next time.
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1

Postby Deacon on Sun 18 May 2014, 3:51 pm

Looking forward to this mate. :snack:
User avatar
Deacon
UKAR Supporter

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1

Postby BFA on Sun 18 May 2014, 6:54 pm

It's a Jag , therefore this will be awesome ! :clap:
User avatar
BFA
UKAR Supporter

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1

Postby Tug 747 on Mon 19 May 2014, 6:04 am

Thanks Alan

BFA wrote:It's a Jag , therefore this will be awesome ! :clap:


No pressure then hey. :biggrin:
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1

Postby Tug 747 on Sun 01 Jun 2014, 2:13 pm

Well progress has been a bit on the slow side but i have found the time to post an update.

Image
IMG_0222 by Newdawn images, on Flickr

Well after a little bit of filling and some sanding i added the canopy and proceeded to spray with undercoat

Image
IMG_0223 by Newdawn images, on Flickr

I then added some pre shading

Image
IMG_0226 by Newdawn images, on Flickr

Then came the nightmare i sprayed it with Hannants Xtracrylix desert pink and i have always had trouble spraying these paints for some reason or another. To thick , To thin , Spidering , Splattering and finally a clogged up air brush but after some cursing and swearing i managed to get it done but in the process i seem to have lost my pre shading.

Image
IMG_0230 by Newdawn images, on Flickr

The picture appears to show the colour a bit brighter than it actually is.

Until the next time thanks for looking.
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Deacon on Sun 01 Jun 2014, 2:48 pm

Although I like the Xtracrylix range, I have the same problems as you mate when it comes to thinning them.

But, at least you are progressing your build mate, which is more than I can say.

Well done. :up:
User avatar
Deacon
UKAR Supporter

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Craig on Sun 01 Jun 2014, 2:54 pm

Looks good mate! I do like a Jag :smile: How would you rate this compared to the Airfix version? First impressions seem to be this has needed a bit of work?
User avatar
Craig
UKAR Staff

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby jaguar54 on Sun 01 Jun 2014, 7:41 pm

Looking good Doug, but I will be keeping an eye on it lol :lol:
jaguar54

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Fumbles on Sun 08 Jun 2014, 3:40 am

I built this kit about 8 maybe 9 years ago and I'll say.... Your doing a better job of it then I ever did. Well done!
User avatar
Fumbles

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Tug 747 on Wed 11 Jun 2014, 9:52 am

Craig wrote:Looks good mate! I do like a Jag :smile: How would you rate this compared to the Airfix version? First impressions seem to be this has needed a bit of work?


This is the first Jaguar that i have built Craig so i can't comment on the Airfix version but a friend of mine has built the Airfix kit and he has made a smashing job of it with open panels as if it is in maintenance.

He also has the Kitty Hawk kit in his stash so it will be interesting to see how the 3 compare :grin:

Fumbles wrote:I built this kit about 8 maybe 9 years ago and I'll say.... Your doing a better job of it then I ever did. Well done!


Thanks Fumbles

Almost done now. Will try to get some shots up in a day or 2.
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Deacon on Tue 24 Jun 2014, 11:22 am

You've got so far with this mate, please tell me you will get it finished on time? :sweat:
User avatar
Deacon
UKAR Supporter

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Tug 747 on Sat 28 Jun 2014, 5:00 pm

Deacon wrote:You've got so far with this mate, please tell me you will get it finished on time? :sweat:



No need to worry Alan i finished it about 2 weeks ago but due to work and doing some travelling :whistle: I have only just managed to take some photos today.
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 updated

Postby Tug 747 on Sat 28 Jun 2014, 5:06 pm

Well i enjoyed this build apart from the raised panel lines and i had a small problem with the nose art decal which is nothing to do with me. :lol:
The nose art decal comes in 2 halves, A coloured bottom halve and a black top halve so i applied the bottom half and let it dry and then when i went to add the top half i noticed that the arms didn't match up so that is why Johnny Fartpants has 3 arms.

Image
IMG_1363 by Newdawn images, on Flickr

Image
IMG_1366 by Newdawn images, on Flickr

Image
IMG_1376 by Newdawn images, on Flickr

Image
IMG_1378 by Newdawn images, on Flickr

Well i hope that you guys like it and until the next time happy modelling
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Postby Craig on Sat 28 Jun 2014, 5:28 pm

Nice job mate, looks like that wasn't the easiest of builds! I don't think I'll be trading in my Airfix one just yet! :hide:
User avatar
Craig
UKAR Staff

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Postby Tug 747 on Sat 28 Jun 2014, 5:32 pm

Thanks Craig. I will be interested to see how the Airfix jag goes together.
User avatar
Tug 747
UKAR Moderators

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Postby Deacon on Sat 28 Jun 2014, 8:02 pm

Well done mate, lovely result. :clap:
User avatar
Deacon
UKAR Supporter

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Postby jaguar54 on Sun 29 Jun 2014, 12:21 pm

Very nice Doug, you have made a good job out of a not so good kit well done mate :clap: :clap:
jaguar54

Re: Twin Engine GB ESCI 1/48th Scale Jaguar GR.1 FINISHED

Postby Tug 747 on Mon 30 Jun 2014, 7:56 am

Deacon wrote:Well done mate, lovely result. :clap:


Thanks Alan

jaguar54 wrote:Very nice Doug, you have made a good job out of a not so good kit well done mate :clap: :clap:


Thanks Paul much appreciated
User avatar
Tug 747
UKAR Moderators


Return to UKAR Modelling Group Builds

Who is online

Users browsing this forum: No registered users and 2 guests