T & T GB 1/72 antonov An-26 Russian Project Done!
T & T GB 1/72 antonov An-26 Russian Project Done!
Hi all
My entry for this build is a well known aircraft by an unknown manifacture, I know very little about them, and it is obvious it is a short run kit but with some patience (sic) and a lot of luck this could turn out ok (fingers crossed)
The Pics
As you can see the moulding is crude and the etch brass is limited somehow I think I'm going to need patience with this one
These parts are plastic inspite of looking resin
All in all I think I've a bit of work on this and filler may be a major bit of the final kit but its an unusual subject so I'm looking forward to it.
Ian
My entry for this build is a well known aircraft by an unknown manifacture, I know very little about them, and it is obvious it is a short run kit but with some patience (sic) and a lot of luck this could turn out ok (fingers crossed)
The Pics
As you can see the moulding is crude and the etch brass is limited somehow I think I'm going to need patience with this one
These parts are plastic inspite of looking resin
All in all I think I've a bit of work on this and filler may be a major bit of the final kit but its an unusual subject so I'm looking forward to it.
Ian
Last edited by ianf on Wed 30 Sep 2009, 10:56 pm, edited 2 times in total.
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
- Ben Montgomery
- Posts: 2742
- Joined: Sun 31 Aug 2008, 2:30 pm
- Location: Cambridge
- Contact:
Re: T & T GB 1/72 antonov An-26 Russian Project
Any update on this? Cant beat a Russian Transport model!
Ben
Ben
Re: T & T GB 1/72 antonov An-26 Russian Project
Hi mate! just looking back over the GB thread as i actually have a day off, and don't know how i missed this one! Looking forward to seeing your blood sweat and tears on it, but it's gonna be worth it to see the finished article! good luck!
Matt hates Photo Etch as of today
Re: T & T GB 1/72 antonov An-26 Russian Project
Ian how is the Antonov coming along mate?
Deacon
Deacon
Re: T & T GB 1/72 antonov An-26 Russian Project
Ian how is the Antonov coming along mate?
Deacon
Hi Deacon
Unfortunatly this kit has not been started yet, this and the barracuda has been neglected somewhat. I'm hopeing to start this one next week. but thanks for asking.
Ian
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Re: T & T GB 1/72 antonov An-26 Russian Project
Hi well after a lot of delay and only 11 days left to the end of the build I can post something at last! This kit is a curates egg some of the detail on the moulds is great but the fit of parts is very hit or miss. Although the pics don't show much progress its taken a long while to prep the parts with a lot of sanding and carving.
This pic shows the basic cockpit in place I decided as much will not be seen I would not go to town here. Also the green stuff filler is filled with nose weight pellets
All the slots and holes have to be drilled out and filled to shape
The wings and engines took a lot of trail and error to marry to each other then I filled the joints
All I need to do now is rub everything down and add detail and the wings will look ok fingers crossed
So no pressure just 11 days to go! I do think though that all the other prep work I have done on the other parts should mean my next update should come quicker.
I will keep you posted.
Ian
This pic shows the basic cockpit in place I decided as much will not be seen I would not go to town here. Also the green stuff filler is filled with nose weight pellets
All the slots and holes have to be drilled out and filled to shape
The wings and engines took a lot of trail and error to marry to each other then I filled the joints
All I need to do now is rub everything down and add detail and the wings will look ok fingers crossed
So no pressure just 11 days to go! I do think though that all the other prep work I have done on the other parts should mean my next update should come quicker.
I will keep you posted.
Ian
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
- Ben Montgomery
- Posts: 2742
- Joined: Sun 31 Aug 2008, 2:30 pm
- Location: Cambridge
- Contact:
Re: T & T GB 1/72 antonov An-26 Russian Project
It begins! I've been looking forward to this one!
Good job so far, don't think I would be brave enough to attempt one of these
Good job so far, don't think I would be brave enough to attempt one of these
Re: T & T GB 1/72 antonov An-26 Russian Project
Hi
As I said in my last post I hoped progress would be a bit quicker and with 9 days left it better had be! I have made steady progress with the main parts fitted and filled and sanded so hopefully now less sanding
MY main fear was that the 3 piece rear fuselage would not line up square and would be tricky to fit. Well the first part didn't happen but the second part was more fiddely than hard.
I've still a bit of sanding and cleaning up to do
I'm hopeing that by wednesday I can get a primer on, if so I may go for one of the more elaborate schemes if not then it will be a simple one colour scheme.
Watch this space.
Ian
As I said in my last post I hoped progress would be a bit quicker and with 9 days left it better had be! I have made steady progress with the main parts fitted and filled and sanded so hopefully now less sanding
MY main fear was that the 3 piece rear fuselage would not line up square and would be tricky to fit. Well the first part didn't happen but the second part was more fiddely than hard.
I've still a bit of sanding and cleaning up to do
I'm hopeing that by wednesday I can get a primer on, if so I may go for one of the more elaborate schemes if not then it will be a simple one colour scheme.
Watch this space.
Ian
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Re: T & T GB 1/72 antonov An-26 Russian Project update 21-9-09
Wow! You're making some serious progress with this one- I think you need to do some kind of mind-meld with Deacon, if you're going to get this one finished by the deadline- I really hope you do it!
Matt hates Photo Etch as of today
Re: T & T GB 1/72 antonov An-26 Russian Project update 21-9-09
Hi matt nope I don't need a mind meld, I've got scotty to fix my warp drive it isn't only deacon and seamus that can build fast!
Ian
Ian
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Re: T & T GB 1/72 antonov An-26 Russian Project update 21-9-09
Well I cut this one really close! just 8 mins left of this GB but she is finished! I really didn't have enough time on this as it was really an aweful lot of cleaning up of parts was required.For example the exhausts are clompletly solid and required drilling and filling to shape. That said it wasn't a bad kit considering its origin. If I had more time I would have replaced the props if possible and got alternative decals, probably the hungarian special scheme. Still I can have a rest now till the next GB begins
The white colour you see at the base of the fin is the clear glass light I have replaced the kit one with kristel klear which is slowly drying, hence it's not clear yet!
Thanks for looking.
Ian
The white colour you see at the base of the fin is the clear glass light I have replaced the kit one with kristel klear which is slowly drying, hence it's not clear yet!
Thanks for looking.
Ian
Last edited by ianf on Wed 30 Sep 2009, 11:13 pm, edited 1 time in total.
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Re: T & T GB 1/72 antonov An-26 Russian Project Done!
You cut that fine mate .
Great looking build Ian, well done sir.
It is now 00.00 so you have had 8 minutes rest. Will you be starting your build for the Recon and Vietnam GB's now?
Deacon
Great looking build Ian, well done sir.
It is now 00.00 so you have had 8 minutes rest. Will you be starting your build for the Recon and Vietnam GB's now?
Deacon
Re: T & T GB 1/72 antonov An-26 Russian Project Done!
Hi alan
I've decided what to build in the recon Gb yes, I was just looking tho have you submited your first completed one yet, I mean the GB's are 10 mins old
Ian
I've decided what to build in the recon Gb yes, I was just looking tho have you submited your first completed one yet, I mean the GB's are 10 mins old
Ian
Victor XL231 Lusty Lindy, crew chief.
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
Our face book page. https://www.facebook.com/LustyLindy231/?ref=bookmarks
- flying_medic
- Posts: 493
- Joined: Thu 30 Apr 2009, 8:58 am
Re: T & T GB 1/72 antonov An-26 Russian Project Done!
Unusual subject, very nicely done.
Re: T & T GB 1/72 antonov An-26 Russian Project Done!
That came out well, wouldn't think it was the same kit as the sprue shots.
Re: T & T GB 1/72 antonov An-26 Russian Project Done!
Good stuff Ian, a fine job on a far from straightforward kit