Revell GB - FTS's F4U-5 Corsair *Finished*
Revell GB - FTS's F4U-5 Corsair *Finished*
Typhoon01 beat me to the post by building the Naval version of this kit so i'll be building the Marine Corp option. It's not a problem as I was going to buy another one of these kits so that I could build both. Now my spidey sense is telling me that this kit is the Italeri kit. Why? Well the sprues are exactly the same as the Italeri F4U-5N that I've just finished. Also when compared to the other F4U-1 Corsairs that Revell do (which are bloody awful!) these are massively better in quality, although not amazing.
Box and sprues for now.
IMG_1139 by harrison-green, on Flickr
IMG_1142-001 by harrison-green, on Flickr
Box and sprues for now.
IMG_1139 by harrison-green, on Flickr
IMG_1142-001 by harrison-green, on Flickr
Last edited by FTS on Sat 08 Feb 2014, 1:22 pm, edited 1 time in total.
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair
Made a start on this today. Because the kit is actually an F4U-5N night fighter it doesn't come with any ordnance or bomb racks and wants you to mount to external fuel tank on the centreline. The problem with that is that the F4U-5 didn't carry a centreline tank and flew with it carried on the starboard pylon with the port normally carrying a 500lb or napalm tank (wake up at the back!! ) So what I've decided to do is leave the tank off and attach the rocket stubs. It's not accurate but it's the best I can do with this kit.
IMG_6500 by harrison-green, on Flickr
IMG_6501 by harrison-green, on Flickr
IMG_6500 by harrison-green, on Flickr
IMG_6501 by harrison-green, on Flickr
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair
Base coat for the chipping applied. I couldn't find any metallic enamel paints in the stash so I've had to give a coat of dusty Tamiya acrylics. It shouldn't matter though as it's only for the chipping. I've coated it with some layers of hairspray to protect the base layer for when I do the chipping a bit later on. You may have also noticed that the guns have been replaced from the night fighter version to the appropriate day F4U-5 version. The nose for this kit is much too short but there's nothing I can do about that so it'll stay as is.
IMG_6502 by harrison-green, on Flickr
IMG_6502 by harrison-green, on Flickr
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
- Irishaernut
- Posts: 545
- Joined: Mon 09 Jul 2012, 1:56 pm
Re: Revell GB - FTS's F4U-5 Corsair
Chipping ? If you can take a few pics of that process it would be great.
Re: Revell GB - FTS's F4U-5 Corsair
All you need to know. It's the same principle with this build except I'm building a plane not a tank (you might have noticed)
[youtube]http://www.youtube.com/watch?v=7CNFdEZnQN8[/youtube]
[youtube]http://www.youtube.com/watch?v=7CNFdEZnQN8[/youtube]
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair
Well like the muppet I am I forgot to spray the red before the blue, which would have made life much easier! Because I don't intend to have any chipping in the red areas I went ahead and chipped small areas around panels and the walkways with a pin. I then coated it with Humbrol Gloss to provide a protective layer. Not to add the red.
IMG_6503 by harrison-green, on Flickr
IMG_6503 by harrison-green, on Flickr
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair
This would have been so much easier if I sprayed the red first! I've also ran out of Tamiya tape so i've painted the red by hand, first with a white undercoat. The decals were very brittle and split which is surprising considering the kit isn't that old! I'll leave the decal setting solution to do its work and crack on with some more tomorrow evening.
IMG_6506 by harrison-green, on Flickr
IMG_6507 by harrison-green, on Flickr
IMG_6508 by harrison-green, on Flickr
IMG_6506 by harrison-green, on Flickr
IMG_6507 by harrison-green, on Flickr
IMG_6508 by harrison-green, on Flickr
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair
Looking nice mate despite the decal problem.
- Irishaernut
- Posts: 545
- Joined: Mon 09 Jul 2012, 1:56 pm
Re: Revell GB - FTS's F4U-5 Corsair
Thanks for the link I'm gonna get a small kit to try this on
Re: Revell GB - FTS's F4U-5 Corsair
Not much more to do now.
Wash on
IMG_6652 by harrison-green, on Flickr
Wash off, well mostly
IMG_6653 by harrison-green, on Flickr
Wash on
IMG_6652 by harrison-green, on Flickr
Wash off, well mostly
IMG_6653 by harrison-green, on Flickr
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair
Recently your Corsair builds have been wonderful mate, so this one has got a lot to live up to.
Re: Revell GB - FTS's F4U-5 Corsair
Deacon wrote:Recently your Corsair builds have been wonderful mate, so this one has got a lot to live up to.
Do you not like the chipping!?
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair *Finished*
facebook.com/shgpmedia
instagram.com/shgphotography86/
Youtube - SHGP Media
instagram.com/shgphotography86/
Youtube - SHGP Media
Re: Revell GB - FTS's F4U-5 Corsair *Finished*
Well done mate, a lovely build.
Re: Revell GB - FTS's F4U-5 Corsair *Finished*
Looking nice! Good stuff!
- Irishaernut
- Posts: 545
- Joined: Mon 09 Jul 2012, 1:56 pm
Re: Revell GB - FTS's F4U-5 Corsair *Finished*
lovel y job